Is it a pint?
133 points
3 hours ago
| 26 comments
| isitapint.com
| HN
jjgreen
3 hours ago
[-]
In Yorkshire a short pint will result in "Could you fit a whiskey in there?", "yes of course", "THEN FILL IT WITH BEER"
reply
calebelac
3 hours ago
[-]
I'm going to start using this approach. Cheers!
reply
BashiBazouk
3 hours ago
[-]
Reminds me of backpacking up and down the east coast of Australia. I learned that Fosters is only northern New South Wales for beer. Every place had their own preferred beer, but maddeningly they all had their own glass. A tenner, a schooner. Each a slightly different size. I made friends with a guy in Hobart that was staying in the hostel as he was doing research there, I think he was a biologist. He took me to his favorite pub as they served imperial pints. I think who ever is behind this site needs to do some serious research in Australia as they could, at least, double the "know your glass" section...
reply
mcbain
2 hours ago
[-]
You might enjoy the matrix of regional sizes and names on Wikipedia: https://en.wikipedia.org/wiki/Beer_in_Australia#Beer_glasses

No, us locals don't know them all either!

reply
lucideer
3 hours ago
[-]
I'm from Ireland, where filling beers precisely up to the brim is practically a religion, & many barmen will even take the glass back & top it up if they see the head diminishing too quickly in the space of time it takes you to pick the freshly poured pint up.

One thing that always struck me as odd is how the culture is seemingly the opposite of this in apparent beer meccas like Belgium - not only are the glasses typically much smaller (this is fine) but they also leave massive gaps at the top. The glass capacity is never treated as being close to the rim at all.

reply
pmh
2 hours ago
[-]
> not only are the glasses typically much smaller (this is fine) but they also leave massive gaps at the top

I'm wondering if this is due to the prevalence of cask ales vs bottle/keg conditioning. The former is relatively uncommon in Belgium and you want the head from the latter.

That said, oversized glassware (e.g. Duvel's tulip for aromatics) and/or fill lines are also used to accommodate the head while still not cheating the customer out of volume.

reply
lucideer
1 hour ago
[-]
It could well have emerged as a cultural norm from the prevalence of heads, but I've seen it often for very moderate heads, with a gap left above the foam.

> not cheating the customer out of volume

I don't think it's cheating if its the norm. One would expect prices to be set appropriately for the average volume served (i.e. a full glass would be a bonus rather than the gap being a loss).

I do just find it odd, coming myself from the opposite culturally.

reply
amonon
2 hours ago
[-]
My understanding is Belgian beer culture considers the aroma to be an important part of the experience. But I’ve never been, that’s all through osmosis.
reply
dkarl
1 hour ago
[-]
This is exactly it. That's why the glasses have the same basic form (stem, bowl, and tapered rim) as wine glasses and snifters. The liquid sits in the bowl, and the aroma is captured in the empty space between the liquid and the rim.
reply
ahofmann
2 hours ago
[-]
I remember watching the cornetto trilogy ( https://en.wikipedia.org/wiki/Three_Flavours_Cornetto ) and always wondering why on earth they fill up the glasses up to the brim. It is uncomfortable to transport this way and not spill beer.
reply
fanf2
2 hours ago
[-]
When CAMRA was new in the early 1970s, they started a campaign for oversize glasses holding a pint to the line instead of a pint to the rim, so that there would be space for a pint of liquid and a head in the glass. The big breweries hated this idea and mounted a reactionary campaign arguing things like it would be too expensive to replace all the glasses, or serve customers the full measure they had paid for. (My father was a new recruit at Guinness and sadly one of his early tasks was the pint-to-brim campaign.)
reply
JetSetIlly
1 hour ago
[-]
I no longer drink in pubs but in my neck of the woods, the pubs that specialised in cask ale often had lined glasses.

The problem was that many people insisted on the glass being filled to the brim, because they felt they were being short changed. So it solved one problem but created another.

reply
OJFord
2 hours ago
[-]
First sip's at the bar; then you can
reply
thih9
1 hour ago
[-]
Here are your beers lads, I didn't spill anything! They taste good too.
reply
dismalaf
3 hours ago
[-]
In Czech Republic they usually pour 3 fingers of head. But the measure line is also part way down the glass, the foam all above the line...
reply
ahartmetz
34 minutes ago
[-]
Same in Germany. In Belgium, the glasses don't have a line and they don't fill them to the brim neither! The only thing that prevents pubs from cheating you out of some of your beer is their reputation. And to be honest, I sometimes had doubts about getting all that I paid for.
reply
philipwhiuk
3 hours ago
[-]
Kind of.

Guinness glasses are exactly a pint, so the Guinness head means you're getting less than a pint of actual beer.

This is tolerated/expected and so de facto correct but de jure perhaps not.

reply
lucideer
1 hour ago
[-]
> the Guinness head means you're getting less than a pint of actual beer

I hate to be pedantic but pint being volumetric, you're still getting a pint, independent of density. Also - a nitrogen head doesn't dissipate, so you never get a gap.

I'm now curious though whether a nitrogen head is less dense than a CO2 head...

reply
ahartmetz
32 minutes ago
[-]
It feels much denser, and I think it does dissipate... but slowly.
reply
petesergeant
3 hours ago
[-]
The only sensible approach here is pint-to-line glasses. I don't want my glass filled to the very top where I'll spill it, I want it filled to the pint line. Sadly in the UK up to 5% of the pint is allowed to be foam, but I'd expect any sensible barman in the UK to top me up to the pint line if I asked, and be apologetic about it.
reply
xnorswap
3 hours ago
[-]
I got poured a pint by a newbie behind the bar at a hotel recently and she looked embarrassed as it was about 40% head, but to her credit she went to fetch the shift supervisor before I said anything.

He explained after pouring it better that, even the remaining head (It had ~3/4 inch even after fixing it) might still be met by derision by many customers. "They'd be asking if you would be charging them for just for the half" etc.

There's a bit of leeway but you'll quickly hear about it if you short a pint too much.

reply
vojtapol
3 hours ago
[-]
Yes. Americans/Canadians famously can't pour beer properly. If you are pouring a pilsner or really any lager, a head of at least 2 inches is actually correct and absolutely desirable. The way it's poured in Canada (no head) is borderline undrinkable to me.

https://www.youtube.com/watch?v=dggKezrSQxI

reply
mb7733
2 hours ago
[-]
Preferences vary on both sides of the Atlantic. Another comment on this post complains that Americans pour beer wrong because they _do_ pour with a head.

> Also in the US (probably due to lack of training and the customer too embarrassed to complaining) tend not to fill it the brim (and so not even 16''). I've seen 2-3 inch heads and asked them to top it up. They look at me as if I've just insulted George Washington

reply
masfuerte
3 hours ago
[-]
If an establishment wants to serve drinks with a head they should use glasses with a mark on the side indicating the measure, rather than glasses which need to be brim full. Using the latter style of glass and including a head is just ripping off the customer.
reply
bregma
1 hour ago
[-]
How do you measure the head through the red solo bubba cup?

Really, no self-respecting Canadian would drink beer out of anything except directly out of the bottle, can, or keg.

reply
consp
3 hours ago
[-]
We call that kind of beer without any head "dead". Measurement here is about two fingers width, and if you do it the first time and screw up it is two fingers in length (second part is of course tounge-in-cheek).
reply
skipants
2 hours ago
[-]
As a Canadian: hard agree. Beer without head is gross.
reply
mattmanser
1 hour ago
[-]
You should try the Dutch!

They think a big head means a good lager and every pint you get is 80% head.

reply
secondcoming
2 hours ago
[-]
If I get a beer with no head I'm assuming the glass was dirty
reply
anfractuosity
57 minutes ago
[-]
Maybe it was a Czech Mlíko pour ;) The faucets they use are pretty cool (https://www.lukrfaucets.com/en/)
reply
post-it
3 hours ago
[-]
I'm not sure I understand, why didn't she just top it up?
reply
xnorswap
3 hours ago
[-]
Who knows, she obviously lacked experience, I guess she just panicked or worried it might be an issue with the barrel rather than her pour?
reply
dismalaf
3 hours ago
[-]
Right? Just top it up, let some of the foam cascade over the side... Foam always forms in the keg if it sits for too long so you need to let some of it out anyway.
reply
ch_123
3 hours ago
[-]
In the UK and Ireland, a pint is 20 oz. (equivalent to just over 19 US ounces), so I always feel cheated by 16 oz. "pint" glasses in the US.
reply
vlod
3 hours ago
[-]
Also in the US (probably due to lack of training and the customer too embarrassed to complaining) tend not to fill it the brim (and so not even 16''). I've seen 2-3 inch heads and asked them to top it up. They look at me as if I've just insulted George Washington.
reply
mcjiggerlog
3 hours ago
[-]
Well, depending on the type of beer, that's intentional. It's not always the faux-pas that it would be to do this when serving cask ale in the UK.
reply
bardak
2 hours ago
[-]
But usually when that is the case they will use glassware that has a 20oz line on the glass with room for the head.
reply
lbourdages
2 hours ago
[-]
It is the same in Canada [1] yet I frequently see beer sold in "US pints" over here. I assume they do it so they can advertise cheaper prices (the amount being smaller). Some places will write the glass size in ounces, but some won't.

It is one of my pet peeves for sure.

[1]: https://ised-isde.canada.ca/site/measurement-canada/en/buyin...

reply
consp
3 hours ago
[-]
A pint in the Netherlands usually is 500ml. In very rare cases, but only in real pubs (not mass market "Irish" pubs) you get an actual pint. So you are cheated out of about ~68ml in that case. Vs the US you get a few ml more.
reply
amiga386
2 hours ago
[-]
As far as I knew, Netherlands pubs typically sold:

- 200ml "fluitje" (little flute)

- 250ml "pintje" (little pint), often sold in a "vaasje" (vase, a tapered beer glass). This is the typical beer measure: https://nl.wikipedia.org/wiki/Pintje "Het bestelde glas pils heeft doorgaans een inhoud van 25 cl"

They also sell standard bottled beer in 300ml and standard cans in 330ml: https://nl.wikipedia.org/wiki/Standaardglas

I was not aware that 500ml was usual for the Netherlands. It is usual in, say, Germany, where they also sell the 1 litre Maß

reply
ahartmetz
26 minutes ago
[-]
The Maß is only a thing in Bavaria and strongly Bavarian-themed places, and almost nonexistent for bottles or cans anywhere in Germany. Faxe (which is Danish) sells one liter cans and some Czech brands sell or used to sell 1.5 liter plastic bottles - that's about it. The next common size is 5 liter mini kegs.
reply
jcul
2 hours ago
[-]
Do they actually call it a pint or just a half litre / large beer?

That's seems to be the norm in a lot of mainland Europe.

reply
ch_123
2 hours ago
[-]
A standard US pint is about 473ml so a US pint is ~95ml less than an imperial pint.
reply
thrance
2 hours ago
[-]
Same thing here in France. Except I've never seen any "real" pints here, it's always 50cl.
reply
dghf
3 hours ago
[-]
This is why I get agitated when Americans claim to use imperial units. If they did, their pints would be the correct size.
reply
cjs_ac
3 hours ago
[-]
Americans don't claim to use imperial weights and measures; they use customary weights and measures, which were also used in the UK prior to the creation of imperial units with the Weights and Measures Act 1824.
reply
kube-system
2 hours ago
[-]
There are many people in America who do not know the difference, the mistake is fairly common.
reply
bee_rider
1 hour ago
[-]
At this point they are just American units, right? Since the UK has upgraded already.
reply
cjs_ac
1 hour ago
[-]
The origin of US Customary units is British, even if the US, Liberia and Myanmar are the last countries still using it. The UK has almost entirely adopted metric (yards and miles are still used for measuring distances on roads and pints are still used for milk and beer, and the last government made the eccentric decision to permit pints for wine, which no producer used because they couldn't get the bottles), but these systems of units have identities beyond whether or not they're in use anywhere.

EDIT/CORRECTION: Milk is sold in multiples of 568 mL, so while the quantities are pints, the measurement is metric.

reply
ascorbic
1 hour ago
[-]
Beer and cider are the only drinks that are legally not sold by metric volume in the UK. They have to be served by the pint, 2/3, 1/2 or 1/3. Every other drink has to use metric.
reply
rafram
1 hour ago
[-]
Not really. The UK uses imperial units for most of the things you use units for in daily life (roads, cooking, drink sizes, body weight, utilities, land area...), even though they theoretically converted to metric. Canada is similar.
reply
ZeWaka
1 hour ago
[-]
That's why we call it the US Customary System.
reply
alnwlsn
2 hours ago
[-]
The (incorrect) claim is indeed made in every single metric vs "imperial" comments section I've come across.
reply
bryanrasmussen
3 hours ago
[-]
surely if that was the claim George Washington would never have had his dream

https://www.youtube.com/watch?v=JYqfVE-fykk

reply
loeg
3 hours ago
[-]
It's not completely uncommon to be offered 16 oz or 20 oz as options in the US. But I see it more at "fast casual" restaurants than bars or more upscale restaurants.
reply
cbm-vic-20
2 hours ago
[-]
And of course, what an "ounce" means may vary. According to Wikipedia "An imperial fluid ounce is defined in British law as exactly 28.4130625 millilitres, while a US customary fluid ounce is exactly 29.5735295625 mL, and a US food labelling fluid ounce is 30 mL."
reply
dfawcus
2 hours ago
[-]
The volume of UK and US fluid ounces being different also doesn't help.

The UK pint is 568ml, apparently a US pint is 473 ml.

reply
eduction
2 hours ago
[-]
Your pubs kindly return the favor when we order whiskey. As Hunter S Thompson is reported to have quipped in a bar your side of the Atlantic: "What is this, a sample?"
reply
BoxOfRain
2 hours ago
[-]
That's fair, can't argue with that one.

Personally I'd have us use what the Royal Navy used to serve its rum ration in, the half-gill. This is 1/8 of a British pint or 71 millilitres, and the rum would have been a minimum of 54%!

Fractional gills were the pre-metric shot measure in the UK, but they were still pretty stingy. 1/6 gill in England, 1/5 or 1/4 gill in Scotland, and 1/4 gill in Northern Ireland.

reply
bombcar
3 hours ago
[-]
In the EU I noticed lots of glasses had markings on the side - if it was full to the line, it was a pint (or liter or whatever).

McDonalds cups have a line for ice.

reply
Symbiote
3 hours ago
[-]
At least in the UK it's a legal requirement to use marked glassware when serving beer, cider and wine. (Or to use a marked measuring cylinder and pour that into the drinkware, which is sometimes done for wine.)

It's also the law in at least some EU countries, although I haven't checked beyond Wikipedia: https://en.wikipedia.org/wiki/Fill_line

reply
BoxOfRain
2 hours ago
[-]
In true British fashion the requirements for draught beer and cider are in pints, while wine is sold in millilitres.
reply
RGamma
3 hours ago
[-]
Measuring beer is serious business in Germany to the point the EU commission had to comment on a rule change that supposedly forbade the usage of steins for foaming drinks (it didn't, but Germany wanted to be extra strict): https://www.bayern3.de/bier-steinkrug-eu-richtlinie

https://germany.representation.ec.europa.eu/news/klarstellun...

reply
tveita
3 hours ago
[-]
https://en.wikipedia.org/wiki/Fill_line

Selling drinks in mislabeled containers should warrant a fraud report to your local consumer protection agency. A crowdsourcing app seems like the wrong tool here.

reply
bombcar
2 hours ago
[-]
The US is a different place; though I will say that in Europe everything seemed to be right on the line, whereas in the US I'd say that most pours were to the very brim (likely giving me more than advertised).
reply
luplex
3 hours ago
[-]
and crucially, foam has to be above the line.

There is some back and forth around whether it's legal to serve beer in traditional ceramic steins, where customers can not verify that the foam really starts above the line.

As I understand, it is legal in Germany, but only if there is visible signage that informs customers about their right to pour their beer into a marked standard glass to check the amount. Source (German): https://www.abendblatt.de/incoming/article402102835/wer-hat-...

In 1899, an association was formed in Munich to combat fraudulent pouring. It was banned by the Nazis and re-formed in 1970. They went around and measured beers. This post is its spiritual successor. German: https://de.wikipedia.org/wiki/Verein_gegen_betr%C3%BCgerisch...

reply
stego-tech
26 minutes ago
[-]
This is the sort of goodness the internet was made for. I'm no beer drinker myself, but I'm already sharing it with those in my circles who do.

Also a great way to teach folks on how to hold others honest and accountable, a skill sorely underdeveloped at present. Start with the pours, and push upward from there.

reply
cesaref
38 minutes ago
[-]
On the subject of the weights and measures to check that a pint is a pint, I remember the father of a friend of mine at university who was responsible for the weights and measures for Staffordshire. I think he was the undersheriff or something like that, and that the official pint was part of the collection.

This would have been in the late 80s - i've no idea if it was still in use, but i've a feeling that the law hadn't necessarily moved on, so I guess the official measure could have been required if challenged in court.

reply
jghn
3 hours ago
[-]
In the US at least it's pretty common to see bars using cheater pints. They look like 16 oz pint glasses but with a few tricks wind up only holding 14 oz
reply
eternauta3k
1 hour ago
[-]
One thought I keep coming back to is the immense consequences of how our units of length, weight and volume were defined. Products are often sold with round numbers (1 liter, 0.5 liter, 1 kg, etc). If you could go back in time and fiddle with e.g. the definition of a pint, you'd see that reducing its volume would lead to people drinking less, until it's so small that people just order two pints.
reply
Waterluvian
3 hours ago
[-]
In Canada (and I’m sure elsewhere) there are surprise inspections where government inspectors show up at petrol stations and see if the pump actually gives you what it claims.

I volunteer for the pub equivalent of this.

reply
bluGill
3 hours ago
[-]
In the US every gas pump I've seen (I have not check the majority of states, but still a good sample) has a sticker on it stating inspections and who runs the state department that inspects them. Usually it is a yearly inspection (at least according to the sticker, maybe they do it more often I don't know)
reply
Gormo
1 hour ago
[-]
Not just gas pumps, but any measuring device used to determine the price of a metered product. The scales at the register at supermarkets also have calibration stickers in my state.
reply
bluGill
24 minutes ago
[-]
Now that you mention it, I've seen them at some grocery stores - but generally not in a place I'd be looking unlike gas pumps where is is right next to the price and so you won't miss it.
reply
lucideer
3 hours ago
[-]
I don't know if other companies do this anywhere but if you live in Ireland. Diageo have roles for people to travel around the country doing precisely this.
reply
arkensaw
3 hours ago
[-]
ah yes, the guinness vans, I do often see them out and about
reply
bregma
1 hour ago
[-]
I don't want my beer to taste like gasoline though.
reply
Waterluvian
52 minutes ago
[-]
Both may contain ethanol.
reply
9rx
3 hours ago
[-]
You're in luck. Measurement Canada has the authority to inspect pints. Typically they only act on complaints, though.

https://ised-isde.canada.ca/site/measurement-canada/en/buyin...

reply
ryandrake
3 hours ago
[-]
I have a feeling that if the USA did random, surprise inspections on businesses to make sure what they were selling was actually as-advertised, the whole system would be exposed as fraud within a month.
reply
zabzonk
1 hour ago
[-]
I used to work in the Netherlands (i'm from the UK) and I could never understand how the Dutch put up with so much froth on their beer, even really enjoying being ripped off by it.
reply
froh
1 hour ago
[-]
there is a calibration marker on the glass and the liquid has to be filled up to that line, the froth on top is extra. so on the continent we get more, not less. so from where we stand it looks rather like the islanders are ripped off ;-)

cheers

reply
zabzonk
1 hour ago
[-]
I'm not denying this, but I do remember a jug of beer being ordered and me being asked to pour it into several glasses without noticeable markings, and me trying to end up with about a 1/4 inch of head as I would in the UK and my Dutch friends yelling "more head" or something even less than polite.

Mostly in the NL I drink bottled beer. And I'm a Yorkshire man, at least by birth.

reply
hencq
33 minutes ago
[-]
Yeah, in the Netherlands 2 finger widths is the norm. But if it's more than that, people will get upset that you're pouring them milk.
reply
hrmtst93837
57 minutes ago
[-]
"You poured yourself a mega pint of red wine, correct?"

"A mega pint?"

reply
TheGRS
3 hours ago
[-]
I'll happily volunteer for this. I may have found my new purpose in life!
reply
chaboud
1 hour ago
[-]
I've joked that the 16oz US pint was a long-play metric-system scheme to drive adoption of 500ml (~16.9oz) as a measure, a Pavlovian mechanic to trick beer-drinking Americans that the metric system is actually better because it results in more beer. The joke's on them. We're all about 12oz cans! 33cl? pfft...

Germans have it nailed down with the Kölsch Stange, a 200ml glass that so readily disappears that it stays cold and you just get another from the Kranz.

reply
wolfi1
1 hour ago
[-]
no one drinks it that way, except for those who drive. and believe me, for half a litre in half an hour one yields an acceptable beer temperature
reply
skeptrune
3 hours ago
[-]
Most useful website I've been on in a hot minute
reply
wodenokoto
3 hours ago
[-]
> 79.3% of pours were short (under 100% of claimed volume)

That is quite surprising. What breweries used to do when I worked in cafes and bars was to paint a mark on the glass and under it write "0.5" (in market that sells in liters and not in pints) and this mark is above[1] the half liter mark. Note that it is without units.

Pubs and bars get glasses for cheap or free and the brewery/distributor tries to trick the bar into selling more beer than they expect.

[1] We checked using measure cups from the kitchen. Maybe there is a conspiracy to have kitchens use too little ingredients.

reply
calebelac
3 hours ago
[-]
Thanks for sharing! Glad to see there's some momentum behind this libatious tragedy
reply
metalman
58 minutes ago
[-]
I had a mk1 diesel rabbit, which when asked about the mileage, I would reply that is got 15 miles to the pint, though further into my youth people still refered to a "point of rum", as a measure distinct from all others, but of course bieng Canadian, beer comes in quarts.
reply
amonon
3 hours ago
[-]
Look, I get it. Beer is expensive, these days. Always has been. But I feel like these movements miss the forest for trees.

If we mandate beer volume then places that are “shorting” you will just raise the prices. Not to mention the tax on beer that would be required to pay for the inspection service. No one likes feeling like they got less than they paid for, but there’s solution is to take your business elsewhere.

Also, you know what really annoys me? When a bartender pulls a pint for me, and it’s up to the brim with no foam. Foam is part of the joy of a crisp beer. It adds aroma and anticipation. If I wanted to drink something with no foam I’d drink a soda. And in my heart of hearts (or stomach if stomachs?) I fear that’s where these arguments lead.

reply
Johnny555
2 hours ago
[-]
No one likes feeling like they got less than they paid for, but without regulation, how do you know that you got less than you paid for unless you're going to carry around a measuring glass yourself?

If the places that were shorting you have to raise prices when they have to give you what you paid for, that's false economy -- you're not saving money, if you want to drink less beer to save money, ask for a smaller glass.

reply
goosejuice
40 minutes ago
[-]
There's a distinct difference between food retail and food service. This kind of regulation will harm the later, it does not belong. Are we going to weigh every pizza, every omelette, every side of fries too? We don't need to sterilize every single part of our food culture.

Anyone who has spent even a short amount of time in the food service business will be familiar with shrink. The average bar is probably seeing more than 15% shrinkage. The short pours are probably not offsetting that loss. Margins are thin.

Solutions for the neurotic drinker this website appeals to: - order a can or bottle - buy retail and stay home - go to a self pour joint and pay by volume. Bonus: you don't have to talk to anyone.

Otherwise put away the scale and talk to the bartender. Chances are you come away with plenty of free beer. Most small taprooms will help you find a beer you like by giving you free beer. If you're obsessing over getting what you paid for in food service, you're missing out on the true value of that industry.

Let's not harass our bartenders, a hell of a tough job, with scales. I spent years behind the case of a cut to order cheese shop. There's a time and place for scales. This is not it.

reply
Johnny555
31 minutes ago
[-]
Bars are dying and are on thin margins so they have to do short pours, but if I just talk to a bartender, he'll give me plenty of free beer?
reply
goosejuice
10 minutes ago
[-]
Yes, generally food service operates on thin margins. A neighborhood brewery probably won't be profitable for the first few years, then if successful might stabilize around 15% net* profit margin.

If you go to a beer bar or a tap room, a large part of the role of a bartender is helping you find beer that you like. Successful bars and bartenders thrive from repeat customers. Community is important. This is very obvious if you actually sit down at bars and talk to the people behind them.

reply
amonon
2 hours ago
[-]
I guess I feel the same way about that as I do about a steak. How do I know that the steak is the 16oz I ordered? Ultimately the most important part is if I found the experience satisfying enough to return, not whether the steak was within .5oz of its stated measurement.
reply
roxolotl
3 hours ago
[-]
The solution is in other comments. In the EU glasses are etched with a fill line. Not filled to the mark? You complain.
reply
amonon
2 hours ago
[-]
That seems very reasonable to me.
reply
graemep
2 hours ago
[-]
> No one likes feeling like they got less than they paid for, but there’s solution is to take your business elsewhere.

People need to know how much they got. it can be hard to judge, especially as you will be comparing across visits to different places on different days, and different styles of glass, etc.

reply
Spivak
2 hours ago
[-]
I think your expected outcome is actually the desired one, to kill shrinkflation in favor of actual price increases. When the measures are all the same you can compare apples to apples across different businesses.
reply
badgersnake
3 hours ago
[-]
We’ve had laws requiring landlords to serve standardised pints the UK since 1698. This is not a new problem.
reply
xnorswap
3 hours ago
[-]
1985 is the current one: https://www.legislation.gov.uk/ukpga/1985/72/contents

It's why all bars will have a little plaque saying what size their shots are. Almost always 25ml these days, but 35ml was common in many places. You're allowed to serve shots of either size but not in the same pub.

( edit: Better link: https://www.gov.uk/weights-measures-and-packaging-the-law/sp... )

reply
tialaramex
2 hours ago
[-]
The way they got to the 25/ 35 split involves even more craziness. In England the law said spirits are always measured in sixths of a gill. This entire unit is obsolete, but 1/6 is a tiny bit less than 25ml. Fine.

However in Scotland two sizes were common, a fifth of a gill (slightly more generous than England) and a "nip" or quarter of a gill (a lot more generous). If you're used to ordering a "nip" of something and now you get a lot less you'd be very angry! So the 35ml option is there for the kind of Scottish or Irish establishment which would have been used to these larger measures rather than either try to keep the gill (which is a stupid unit nobody else needs) or anger drunk people.

I wouldn't be surprised if the "Make a sign" difference was to allow licensed premises to gradually shift to the more profitable, smaller, size. Maybe you change the place you own in Glasgow to 25ml first, and if the locals don't kick off you can try Aberdeen next, otherwise try again in a few years.

reply
graemep
2 hours ago
[-]
I did not know about the 35ml is OK too but not both on the same premises rule.
reply
maxbaines
3 hours ago
[-]
Great minds...
reply
maxbaines
3 hours ago
[-]
Agree this is a fact - we mark our glasses because of it. https://www.gov.uk/weights-measures-and-packaging-the-law/pr...
reply
gib444
2 hours ago
[-]
And they say England becoming low-trust is a recent change !
reply
philipwhiuk
3 hours ago
[-]
I like the CAMRA ones which have the pint line below the rim of the glass. Because technically the head doesn't count as part of the pint and there's a lot of back-and-forth about what the legally acceptable amount of head really is (CAMRA say 0%, pub associations serve 5%, pubs themselves serve whatever they think you'll pay for).
reply
Forgeties79
2 hours ago
[-]
It’s such a small thing but when a brewery or restaurant featuring beers writes “pint” as an option and gives me a typical US beer glass (shaker I believe) it annoys the hell out of me. Don’t explicitly write “pint” if it isn’t at least north of 15oz. Definitely don’t if the glass literally can’t hold a pint.
reply
oldandboring
2 hours ago
[-]
I enjoyed reading this site and appreciate the passion and the effort.

The "loss of the pint" is basically shrink-flation. When a bar's costs and/or overhead goes up, they must do some combination of cutting expenses and raising prices. Raising prices means either selling the same stuff in the same quantity for more, or selling cheaper stuff OR less of the same stuff at the same price. Most bars will opt for the latter options to avoid raising prices, because raising prices is more likely to create complaints. All caveats apply, of course -- drop portions or quality too much or too often and you'll get complaints for sure, but "within reason" it's the lesser of two evils.

This is why I personally don't feel like I'm being cheated out of 2oz when I buy a $8 14oz shaker pint of IPA. Clearly, the cost per oz at this bar is $0.57. A 16oz glass would cost $9.14. They don't owe me the 2oz for free just because they used the word "pint". If the state government started enforcing pint measures again, bars would just drop the word "pint" from their signs and menus.

reply
bee_rider
1 hour ago
[-]
Is it called a shaker pint for association with the famously restrained Shakers?
reply
oldandboring
37 minutes ago
[-]
According to my half-assed internet research, it's because it was designed to be used when shaking cocktails.
reply
twodave
2 hours ago
[-]
Now this is what the Internet is really supposed to be about.
reply
d--b
2 hours ago
[-]
As infuriating as it may be, it's a good occasion to learn to let go.

Rationally, you're paying way more than the liquid in the glass, so just mentally tell yourself that the haircut is included in the price, and that's fine. If you can't stand the price anyway, change bar.

You're there to chill. Just chill.

reply
goosejuice
2 hours ago
[-]
I'm sure the same individuals will calculate tip to the cent as well.

As someone who worked in specialty foods for years, you get what you get. Flaws and all. That's part of the charm of this industry. This is especially true for small craft breweries. If you insist on accuracy then ask for a can/bottle list. If you insist on consistency then buy macro.

reply
goosejuice
2 hours ago
[-]
Wait until they discover cocktails.

Bickering over a few dollars when you're paying a premium price for the experience of going out is rather silly. There's better uses of your time, like enjoying yourself.

If you're not familiar with the mess that was nips: https://carolinas.eater.com/2015/10/16/9553903/mini-bottles-...

reply