I think the only thing we're missing to make the USB-C experience perfect is cable labelling. It's unreasonable to make every cable perform to the max spec, but if we could standardise on some labelling or colours for cables that are charging-only, 480 mbit (usb 2 speed), 5 Gbit (usb 3 speed), 10 GB (usb 3.1 speed), 20 GB (usb 3.2 speed), plus whatever higher speeds (and I guess Thunderbolt too), then we'd be golden.
I like the cables I have, and by know I know what cables do what, but it ain't obvious without testing.
Power-only cables could be handy when traveling as they are essentially a condom, but they can only charge slowly and I always have a better cable with me. I wouldn’t mind a PD aware charge-only device but inquire require some MITM circuitry and I’m too lazy to make one.
Even purchasing them is a nightmare these days because everything says ultra super duper fast supreme and then the fine print says it's actually just 3.0 (or doesn't say at all sometimes on online storefronts). Multiple time's I've found myself in the store flipping around the box like a rubics cube trying to find the little fine print that tells me if the cable is more expensive because it's gold plated snake oil or actually matches the higher spec I need.
Meanwhile, the instant I want to transfer a non-trivial amount of bytes, USB 2 speeds come and make my life worse than it needs to be (or at least it did before I sat down, found decent speedy cables, bought them, and then put them in their dedicated spot for me to find the next time I need to transfer files).
Agreed on the purchase experience though. It was a pain to find decent cables, but at least it's possible to end up in a happy place.
What if we just have different connectors for different specs? Then you'd know what supports what by what fits into the connection in the first place.
Anything braided is almost always junk.
I don’t have a requirement for anything over 90w though, so I can generally get away with using whatever I have lying around.
Blue is the only one that's actually endorsed by USB-IF. For the most part USB-IF would prefer if everyone just used their little icons. Luckily manufacturers have a bit more sense and all follow the same color scheme (apart from the occasional black sheep)
I find their cables to be pretty good (the TB5/USB4). They're certainly cheaper than Apple's. They have a soft rubber coating (not quite silicone) and a good bend radius. Compare to the super-stiff (but good) cables that Dell provide with their monitors.
This is not to spec, and to my knowledge this was a cost-cutting measure done by Chinese companies to cheapen manufacturing costs.
So for that reason I CANNOT simply rely on USB-C, I also have to have a USB-C-to-A converter and a USB-A-to-C cable, which is of course ridiculous. Thanks, China.
- You lose me at "toothbrush." I don't want personal care items that have internal batteries at all, because they'll eventually die on me while the device itself (brush heads notwithstanding) is otherwise perfectly functional. I'd much rather keep rechargeable AA(A)s on hand for that kind of stuff. (I still haven't found a good electric razor for this purpose, though, and have actually just gone back to manual for the foreseeable future.)
- I don't think I could live off just one charging port, but would rather just ditch USB-A entirely.
- I'm using wired earbuds, with a standard headphone jack, but with the number of full-sized cans that are using USB-C in some way it baffles me that there aren't more or them (or any, that I've been able to find) that also support using it for audio input, so you you can play them while charging.
My solution to this was to get an electric razor that doesn't use batteries. My 20-year-old no-battery electric Norelco razor was bought in a chain pharmacy. I've looked in recent years, and I don't see them any more in brick-and-mortar stores, but they're still made, and available online.
The (minor, IME) downside is that electric razors without batteries are generally on the low-end of the spectrum, rarely including the fancy (even non-battery-related) features found on the high end electric razors.
https://www.amazon.com/s?k=rechargeable+aa+batteries+usb+c
But in practice, I greatly prefer devices with integrated batteries, because they're more likely to be able to give me useful feedback about the battery level (e.g. a reliable low-battery indicator), rather than just winding down, or having a low-battery indicator with only a passing correlation to reality.
That has less to do with the battery being integrated and more to do with different battery chemistries having different voltage curves.
Nothing would prevent a device from accurately detecting battery levels of NiMH batteries. The problem is all these devices are tuned to an Alkaline battery voltage curve which is much more slanted than NiMH. NiMH has a nearly flat curve with a sudden drop off while Alkaline have a pretty steady decent (with a sudden drop off).
(I also find this important for gamepads, to the extent that I don't just opt to play wired.)
But in the absence of that, I'll take USB-C and the ability to charge while actively using. I find that useful even for wireless gamepads, because then I can attach them to a generic charger on one side of the room, and not run a cable across the room to the console/TV area, because the communication is still wireless and only the power isn't.
It must have been crazy overspecced, I expected it to be a 5-year disposable piece of non-serviceable tech.
I've found that one can buy just new handles on ebay though, without the head and chargers, for only like half the super high retail prices or less, even for the "higher end" models, so I do that every 5-8 years or so if one gets too bad.
That said, I have never had a Sonicare run out of battery either.
Their kid's app has been great.
And of course, it charges with USB-C.
I've had an Oral B electric brush for around 3 years now and it hasn't skipped a beat. I'd hate to have to change batteries when I can just pop it on a inductive charging dock every night.
I don't like USB-C for toothbrushes to charge because there's water in the bathroom. The proprietary inductive charger/stand that comes with Sonicare/Oral-B electric toothbrushes are ideal.
Sucks that they are proprietary but they have been trivially easy to clone by third party manufacturers. $7 on Amazon.
A slight convenience when you want to charge it in that you don't have to turn it around, you can have USB headphones and also charge, you could use more accessories...
But what I'm more getting at is the other way around: that wireless headphones will already have USB-C for charging anyway. And that, particularly for larger ones (that have that port directly on the device, and not in a separate charging cradle), it really seems like a waste that more of them don't leverage that -- so that, again, you could use the headphones while you charge them.
Yes! And you could charge them off your phone!
If I could dream: wouldn't it be nice if you had headphones with charging cables attached to them so that you never had to worry about losing them.
And phones could have a convenient extra port for plugging such headphones into.
Ah, one could only dream.
My other phones (Samsung Galaxy A23 etc) have a USB-C and a 3.5mm headphone jack as Lord intended, so I don't have the idiotic problem of choosing between charging or using headphones / aux cable / etc.
There's no reason to not have two USB-C ports and a 3.5mmm headphone jack too in a device that already costs hundreds of dollars and is, on average, brick-sized, other than fuck you, that's why (aka being "brave").
I.e., same reason that some phones (not mine) don't have a microSD card slot. Particularly those shipped with atrociously little internal memory at a time when a 1TB memory card costs a few dozen dollars.
Anyways, unless the EU rolls out new legislation (like the one that forced Apple to include USB-C on their phones), looks like it's not going to change any time soon.
Apple has enough money to bravely get away with whatever anti-consumer BS they want, paving the way for others to copy them for fashion and profit.
Sure there are exceptions (which is what I buy). But they're not the norm, as evidenced by comments here. Voting with one's wallet buys very little in terms of impact.
People still decry the loss of the 3.5mm TRRS headphone jack, which didn't really go away and never had to.
____
¹ It's an "AR processor", i.e. an Android phone without the phone plus 3D camera and special sauce
I know what you're saying, but to be a little pedantic about it it's actually only USB 3.
(I wish there were mobile devices supporting USB4; it would bring them significantly closer to feature parity with larger devices.)
I thought the same, but that'll happen with devices that use AA batteries too.
I was using a cheap Panasonic EW-DJ10 water flosser that uses AA batteries, but the battery compartment contacts would corrode after some time.
I then switched to one of those China USB-C water flossers, but I think the built-in lithium battery's nearing the end of its life since it'll cut off randomly now. I also used to worry about charging it, since the USB-C port would need to be dried out before I plugged the charging cable in.
No idea what's a happy medium for electronics that need to work near water.
Here's how the last few broke:
* Phone with typical inadequate battery + external portable battery pack plugged in, shoved in together in pocket running Google Maps navigation via bluetooth, and biking. My thigh bent the USB connector.
* USB-C got mangled by office chair. If I had been a USB designer in an office, this would have been the FIRST thing I would have stress tested for
* USB-C plugged into phone and sat on while on car seat. Another thing any half-competent design intern would have listed on their stress test scenario list but it seems the senior designers missed
* Laptop plugged in on the edge of standing desk, USB cable got jammed in gap between adjacent desks.
I much preferred real, sturdy mechanical connections. They should just miniatureize the IEC power connectors and put straight up 19VDC through them.
I do everything on your list. I also have young children who grab and play with things. Our household breaks 1 USB-C plug per year, if that.
I don't know if you were embellishing for effect, but anyone breaking 50 connectors a year probably isn't going to have success with anything short of a fully ruggedized connector solution, which is not something you're going to get on affordable consumer devices.
> which is not something you're going to get on affordable consumer devices
Not true. 1990s connectors hardly ever broke for me. They were all super rugged. I've dropped several-kilogram objects onto VGA connectors, SCSI connectors, and DC barrel jacks and nothing ever happened.
VGA connectors? I've bent the shield on more than one VGA or DVI cable, and it's a nightmare to get a pin straight enough if you happen to bend one... but possible sometimes.
One of the problems with USB mini-A was that the socket would fail, meaning the device had to be repaired or discarded. Combined with the short lifetime (about 300 insertions) it was a disaster which is why you almost never see it.
You’d be more unhappy of those failures had happened in your expensive device rather than your cheap cables.
My kids haven’t broken a single one either and they destroyed plenty of lightning cables.
Stress relief is a thing, people in the 2020s have somehow forgetten about it.
That's a you problem. I have never done this, and neither have any of the dozen people I just asked in my office.
I don’t believe you.
I haven’t broken a plug yet and I’ve used usb c on all my devices for years now
For everything else there are magnetic USB-C connectors
This should be federal law and written into the constitution
Wild. How often do you break the phone itself?
> USB-C got mangled by office chair. If I had been a USB designer in an office, this would have been the FIRST thing I would have stress tested for
Seems like you managed to break one even though it was in the environment that you're saying they're designed for. Maybe you're the problem and USB-C, the technology that billions of people manage to use just fine without breaking on a daily basis, is perfectly fine.
I agree (and am sad) that it's not a ubiquitous feature, but headphones with a built-in dac do exist
If you sell a 10 port USB-C charged someone is going to plug 10 MacBooks into it and complain it doesnt work.
The best I have seen for what you want is
https://ca.ugreen.com/products/ugreen-500w-desktop-charger
but is not cheap at all or something like
https://www.amazon.ca/Powered-Aluminum-Adapter-Computer-Prin...
But your point is still valid. As a nerd I really appreciate being able to use say, my 100W laptop charger or the car jumpstarter pack I have to charge up my earbuds or an electric toothbrush, since it reduces the number of weird little cables or chargers I have to keep track of, but it sure does baffle the non-technical majority that their toothbrush charger fits their laptop 'for some reason' but of course does nothing - plus the confusion when they realize they could physically plug the toothbrush into a pair of headphones, or plug two portable batteries together.
Isn't this just a USB 3.x hub?
It’s still a minor frustration if you have to borrow a cable, but that’s solved by packing a cable, and by encouraging as many other people as possible to also throw out their cheap cables.
Sodding things only charge with their special USB-A to USB-C cable. They're in the bag labeled "cursed usb-c charge cables".
USB-A has always-on VBUS while USB-C doesn't. Because the spec allows for always-on VBUS in a USB-A to USB-C cable, some devices just assume that they're always being powered by one of those cables.
Thankfully this defect is becoming less common outside of temu junk.
By standard, USB C provides no power at all unless the device being powered follows the rules. They're easy rules to follow. The minimum viable way of doing it right requires just two tiny resistors inside of the device.
that's what i've been paying for cables, and it seems reasonable to me.
I dunno, Cat8 is 40gbps and pretty cheap. DOCSIS 4.0 does 10Gbps on some really ancient cables. I'm sure Cat9 will do even better, at least the cat people and the doc people are trying harder than the USB people.
Unifi even has a PoE-over-coax solution. Add some Anker GaN shit and I'm sure it can be miniaturized.
> outside of connecting a laptop to your monitor
As soon as I need a "special" cable to connect a laptop to a monitor, we're effectively back to the 1990s-2000s when I needed a special monitor cable. There is no point to connector standardization if any cable can't do any function.
The whole point of this thread was "one type of cable for everything" and "grab any USB-C cable from your personal stash and they all work for every use case".
While I now no longer have to carry around a bag of chargers when I travel or fish through a bucket of black DC adapters for the right one.
Ethernet is notoriously power hungry, but I bet you can use a phone cable and still get tens of Gb over a very short range.
I completely disagree.
When the only difference between cables is max speed, that's still a huge improvement over a nest of different cable types, half of which are custom. And it's easy to get into a position where all your USB-C cables differ only by max speed.
It's even worse for non-techies, who don't understand what a gbps or a watt is, and who will leave a 1-star review, or worse, trash their cable, because their cable was "slow" but was meant for 240W PD but only supported USB 2.0. They purchased it initially because it had 5 stars.
Ideally, there should only be "5 star" USB cables, and they should all work for all purposes that they can physically plug into.
The situation in the early 2000s is I could spot the cable I needed from a mile away.
> Ideally, there should only be "5 star" USB cables, and they should all work for all purposes that they can physically plug into.
That requires they never increase the speed again. Seems like a bad starting point.
And most people will accept the tradeoff of different cable speeds when it means long charging cables can be 10x cheaper. The problem is when manufacturers choose to use bad labels.
And if you push people off USB they're going to use 27 different kinds of cable and you won't be able to spot which generic black wire you need from across the room.
Also, if we pretend they set the max speed in stone in 2013, it's easy to get yourself a full set of 240W 10Gbps-per-lane do-everything cables in every length from 0 to 2.5 meters. $25 isn't an amazing price but sticking with passive cables keeps you out of the real nasty prices.
We need better labeling rather than making every single USB cable a 40gbit thunderbolt cable.
For all the cables that are your flex carrying around places where you don't know how it'll be used tomorrow, get a good cable and you won't have any issues.
They could have made it just DC +19V and GND over 14 gauge wire with a nice, outdoor-recreation-grade connector and called it a day.
(I used Thunderbolt so that touch and pen inputs could go over the one cable. These days though I just use a MacBook Pro, and hook up a capture card when I need to access the Windows)
> encouraging as many other people as possible to also throw out their cheap cables
One of the main advantages of a single standardized plug is reducing e-waste. This just sounds irresponsible. Having a single tool that covers every possible use case is rarely a good solution.
Things are shifting though. Ikea ships their USB-C stuff without cables now.
The irresponsibility lies with the companies making the non-compliant trash in the first place.
For universal USB-C power support that works with modern power bricks, you need to tie 5k resistors to two pins of the port on the device. This tells the charger to use 5v. I can’t tell you how much cheap stuff out there omits these. They cost almost nothing but they still screw this up over and over, and people blame the standard or the cable…
You can fix that by buying USB-C to USB-C adapters with 5.1 kiloohm resistors.
It should have taken the manufacturer less than one cent to include the resistors, but as a consumer product they will unfortunately cost at least a dollar each.
Especially my cheap consumer electronics. Sometimes they will charge, sometimes they won't charge
For data transfer you can just pick up one or two thunderbolt 5 rated cables, they will do max transfer for USB4, or any other spec in the near future. The LTT true spec cables are fairly priced but there are other big brands that sell the same thing.
Keep a shitty USB-A to C for those devices that do not have the correct pulldown resistor to support 5v 2a charging.
Many people don't realize that USB-C (USB Type-C) just refers to the physical connector. At minimum, speed and power ratings should have been required for any cable using USB-C at one or both ends. It's almost breathtaking to consider how the USB Implementers Forum has fumbled these kinds of basic issues over the years.
Short of making USB proprietary and behind a licensing and certification scheme there is no way to solve this. People need to stop buying cheap junk.
The alternative is barrel connectors. If you plug in the wrong one, there's a decent chance that it a) won't work, or b) never work again.
Or you just borrow their USB-C adapter and don't have any worries.
This has nothing to do with feels.
This kind of defect is extremely rare since this would basically be a USB killer frying every other device you plug it in to. 99% of the time it's the device is missing some resistors on the cc pins which signal to the charger to send 5v. Since usb-c it defaults to 0v until you request something. But USB-A has no CC pins so it just puts 5v out at all times.
We blame usb-c for all this, but it does feel like some mffrs are going out of their way to screw it up.
Yes that's the fault of the manufacturer. But the wildly flexible spec for USB-C let it happen.
With USB-C cables I tend to throw them out unless they are premium cables that cost upwards of $20, I mean I could keep the cheap ones around to charge this or that but cheap cables have this way of going bad, like they are supposed to work if you plug them in either way except they don't, you plug your cheap device in overnight to charge and it doesn't really charge, etc. No way I could trust my wife to handle it.
Personally I think USB got worse in a lot of ways in the 3.0 generation, like at 1.0 they designed a bus architecture that could enumerate 127 devices on a root hub. USB 3.0 doesn't promise anything and ff you start plugging in hubs to your laptop you will hit undocumented limits and find devices start dropping out randomly when you've plugged in several devices and it gives me the heebie jeebies because a mass storage device could drop out. I know mainstream filesytems today are pretty durable but still...
My only issues so far come from charging protocols rather than cables anyway.
Moreover, stuff like how many watts a cable supports are issues that happen regardless connector type.
This device let me categorize all my loose cables (and throw out the truly terrible ones). It was worth every penny.
That app is probably a good place to start but I wouldn't trust it fully.
Before getting the tester I just kept buying new "known good" cables whenever I needed one since my cable drawer was just a huge unknown.
Good thing nobody lies.
Is there a good reason we can't hook one (or both?) end(s) of a cable to a computer and use a program to tell what it does?
I vaguely recall someone from Google working on this issue for Chromebooks. I'm surprised Apple hasn't solved this since they control the OS and hardware. For now you can buy tester devices which read the emarker info and show it on a small display. There's also more advanced testers which test the actual signal integrity and error rates, but these are very expensive and made for the cable manufacturers.
Well, when someone figures out a "standardized way for the controller chip to pass this info up" I hope they do it better than S.M.A.R.T. for disks.
I love USB-C and I guess the device(s) weren’t to spec, but if it plugs, it ought to be safe. Kind of a surprising miss to be honest. Usually the cheap Amazon crap isn’t this bad.
A compliant device has quite a lot of protection against all sorts of faults (short to VBUS etc.) but if the device was non-compliant then all bets are off.
Who knows, the charger might have been so non-compliant that it could have somehow got mains onto the connector, which is potentially deadly so probably good if it's stopped working...
But at the end of the day you shouldn't judge a standard by dodgy and possibly dangerous electronics that completely fail to comply to that specification!
Your chance is 100% because the charger for GBC is 2 AA batteries ;)
65watts isn't even that much, but its enough that I don't need:
- the mac charger that's always connected to the magsafe cable I can't use with anything else,
- the dinky iPhone brick with the cable that needs USB-C on both ends,
- and the slightly less dinky pocketbook e-reader charger with the cable that needs USB-A on the brick-end and micro USB on the business-end.
2x 65 watt USB-C ports and 1x USB-A running at whatever anemic power USB-A is capable of pitfully spitting at my ancient e-reader without drawing the ire of UL or something (5v/500ma still?), perfection.
You should go purpose-buy a charging brick, anything is better than the freebie ones you get with stuff.
Looking back 15 years or so, I remember the old ThinkPad and Dell Latitude/Precision docking stations functioned reliably for as long as I can remember.
Today I have a variety of USB-C and thunderbolt 3/4 docking stations, all of which have been affected by various issues. The the manufacturers of these things don't care.
The latest casualty is a Pluggable TBT4-UDZ, which randomly decided one day that I should only have one working monitor instead of two. Doesn't matter if I use Windows, Mac or Linux. Meanwhile, the same monitors & cables work fine with my desktop.
I appreciate USB-C as a means to charge my stuff, but from now on, I'm going to try and use other ports and cables for everything else. Every laptop's settings will assume only the main screen will ever be used. I've no time to get used to a nice multi-monitor setup just to have it taken away when the USB-C dock starts acting up.
I had a hp nc2400 that had a very nice little dock where you'd set the laptop on top of two guide poles an then slide the dock connector in from the side. A very compact design.
The thinkpad docks just always used so much space on my desk.
Some years ago I may have cheered on the pushes to get iPhones to use USB-C, but at this point I think lightning is a superior connector in that sense. I’ve almost never had one break off.
But every so many months I had to replace the cable because the 4th pin would be burned.
I don't have that issue with USB-C. But I do feel that the lightning receiver is less fragile over the USB-C one. Removing lint from a USB-C receiver is harder.
It should be considered a defective design and recalled, I have been burned several times by this.
My ONLY problem with it is it's just a bit too small. That creates mechanical problems within the plug which are annoying. Plug it in and pull it out 1 too many times and eventually you get a loose connector cable that needs to be replaced.
Generally that's fine as all my chargers have replaceable cables, it's just an annoyance.
I have had a failed port on my laptop - fortunately the laptop can charge on two of its ports but it sucks to have lost one.
I have had a failed port on an iPad, and on my phone. Again I was fortunate to have a fairphone, so I just replaced the port.
That being said, in ten plus years of using USB-c.. this has never happened to me or anyone that I know.
It's actually kind of impressive, all things considered.
That’s the dream, anyway. Life rarely works out quite that cleanly for me.
I recently looked at the connector and reflected on how insanely small it is. It's no wonder it took decades to get to this point, and it's a very neat physical design at a great price. 16 pins and 10A in that little thing. Amazing.
If we designed it now it would be up to 48V from the get go, USB-PD only (there is zero reason for static modes aside from fallback 5V for simple gadgets) and be just a PCIe transport . USB to HDMI could just be a single chip that does PCIe framebuffer device.
I was afraid this article was going to say one connector for everything when it said maximalist. If it had said to kill eSATA, SPF+, RJ-45, DisplayPort, HDMI, 3.5mm audio, and a bunch of other ports it would have been far more controversial. I’ve seen people saying we don’t need card formats anymore because everything can just be an external USB-C flash drive. I’m glad this article wasn’t that maximalist.
- Vacuum, $???, Xiaomi, okay (hard to clean filter): https://www.mi.com/global/product/xiaomi-vacuum-cleaner-p30/ (gift from friends)
- Beard trimmer, $90, Manscaped, great (but I just got it): https://www.amazon.com/dp/B0BQ1GZY7H
- Shaver, $20, Xiaomi, great: https://www.mi.com/global/product/xiaomi-electric-shaver-s20... (purchased at Xiaomi store in Manila)
- Front door palm reader lock, $299, Eufy, good (slow charge speed mitigated by second built-in battery): https://www.amazon.com/eufy-FamiLock-Smart-Lock-Recognition/...
- Lighter, 10 for $66 after negotiating, Shenzhen Vasipor Technology Co, good but needs USB-A-to-USB-C cable: https://www.alibaba.com/product-detail/High-Powered-Recharge...
I really don't get that. Why not a handheld fan? It's cheap, doesn't require a battery, and doesn't need electronics.
I see more electronic fans than handheld fans, and I just don't get it. People like buying brittle plastic future e-waste?
Like AC power strips, with a long cable and a body maybe 12" long with spaced out USB-C and a few USB-A ports.
I'd also like a version that sits on top of a desk and is angled towards you.
They make things like this for AC, but not USB.
(actually there are a few out there by no-name brands, but not many)
Because the usecase of charging many (think 5 or more) devices at the same time for hours is pretty rare.
But I would like having a table with a plethora of sockets and cables available.
Lots of times, I come in and want to charge a bunch of things. Charge a few drone batteries + the controller. laptop, camera + camera batteries. charge things for a long drive, or a longer trip.
As to cables, sometimes I need USB-C, but there are lots of things that require other connectors like micro-usb, or a garmin watch. And sometimes cables go to other devices like wireless chargers.
I imagine whatever replaces USB-C in the future should fix this issue and make a more solid connection like USB-A. However USB-C could be the last wired interface as everything in the future will move to wireless.
For sources, I basically have an INUI battery bank and a 100W wall adapter, then everything is a USB-C sink: Lenovo X1, Pixel 10, Nintendo Switch, Sennheiser headphones
Yes, you can buy adapters, but you end up w/device warts that don't work w/normal USB-C cords and my understanding that they are for the most part pretty dangerously out of spec
Magnetic coupling is an incredibly underutilized user experience tool
We could have had a USB Type-M. (Or, alternatively, Type-F -- for "magnets, how do they work?")
What would be even better is an electric toothbrush that doesn't contain a battery that would work with USB-PD plugged in. Why? Because I like putting my electric toothbrush in my checked bag because it's not essential, and technically you're not supposed to put lithium batteries in checked bags.
- 12 V × 5 A = 60 W
- 20 V × 5 A = 100 W
- 28 V × 5 A = 140 W
Meanwhile, that Xbox roughly needs 12 V at 7.5 A (let's say 90 W, but the internal supply is 165W) . So there is just no easy way to do it with USB-PD. Technically, you can make/buy some sort of USB-PD bench power supply to do this, but I'm unaware of anything on the market right now. One that I use (DPS-150) is limited to 5A output.
You're better off buying some chunky power bank (like Anker Solix) that has your regular wall plug outlets.
what really gets me though is products that support usb-c and then don't support PD, so you end up charging at a glacial pace. The most upsetting incidence of this I've seen is a powerbank charging via usb-c but not supporting PD. So slow!
As far as I could tell the cable is dumb. If you plug the cable into a regular USB-C socket (which I do not recommend) then the tip is +5V and the rest is ground.
In fact it's designed to plug into the plug marked "mobile" on the amp and the 3.5mm end goes into the line out of something else, providing AUX input, which is mixed straight through to the output of the amp (which is thankfully a regular 3.5mm headphone jack).
I guess they over-ordered USB-C sockets and decided to yolo it, or else for some reason only USB-C footprints fit into the space on the PCB. (But they still had to manufacture or were able to obtain these cursed cables ... it doesn't make a lot of sense.)
Devices like this usually come with an A-to-C cable in the box and that's a warning sign, but an even more twisted version of this is when they come with a C-to-C cable and a Type C charger that does not support PD. That's the only combination they tested, and that's your problem now.
I now carry enough adapter cables that I can deliberately take PD out of the equation just to work around these devices.
The charging standards, voltages, and data rates, are frustrating because they're almost never labeled. This is especially true on low end, cables, and device devices. The worst offenders will only charge with a USB-A to C cable with low voltage, which is not what I hope for when I see a USB-C port on a device.
No end to the official Apple lighting cables that died on me over the years, and across iphones and ipads.
more of a trimmer but this had an alright replaceable blade set up and has USB c. if you need the rotating heads I haven't seen one just yet though
Shaver: I purchased this in-person at a Xiaomi store in Manila, very happy with it especially for the price ($20-ish): https://www.mi.com/global/product/xiaomi-electric-shaver-s20...; Amazon link: https://www.amazon.com/Xiaomi-Electric-Skin-Touch-Waterproof... "Xiaomi Electric Shaver S200"
For video input it seems almost deliberate since the TV brands all benefit from licensing out HDMI and forcing it to be the only way to connect to a TV.
Someone's trying to talk about stuff they never used, experienced or googled ever.
But yeah game boy advance cable is $2.5 one day delivery here in Poland
USB-C being "one standard" is a bit of a stretch. It is the Unintuitive Serial Bus, after all. Most will charge. Some faster than others. Some will supply data with 2.0 speeds, others 3.0, yet others will do more. Some will only work with the other devices they came with. Few cables will tell you which is which, unless you have a tester.
To have unmarked cables. This should have been explicitly forbidden by spec as non-compliant. Today unmarked is the norm, even with premium brands. And the few ones that actually mark their cables have their own markings (which I assume is because the official logos are so incredibly bad). So now instead of wondering if the charger will work, you’re wondering if the cable will work.
Secondly, the USB-C rollout was only successful on the sink (device) side. Almost all cheap gadgets come with an A-to-C cable, and chargers and PC ecosystems are very biased on the A ports for the host side. This created an awfully ugly side effect: devices are not always compliant with even basic charging. Since C-to-C should not have live 5V line active at all times, these devices don’t charge at all. I think they’re missing that resistor that tells a compliant charger to make it live. But in either case they only work with A-to-C.
Fairly high. Nitpick time: The Gameboy Color[0] took a standard-size battery that you can still buy today. It did not need to be charged, but you did have to turn the system off to swap batteries unless you had a barrel-jack adapter.
Barrel-jack DC wasn't quite standard, but you might be able to find something compatible if you went to an electronics supply store and paid careful attention to the listed input voltage and polarity on the device. Regardless, most people didn't bother tethering their Gameboy and just fed it batteries since it ran forever on them.
The real proprietary hellhole started with the Gameboy Advance SP, and didn't end until the Switch used Type-C. Hell, the SP is basically a modern smartphone:
1. Proprietary form-fitting battery pack
2. Custom power input connector
3. No separate headphone output
Bonus points: the headphone adapter Nintendo sold for the SP didn't have a power pass-through, so you had to choose between headphones or charging. Though there are third-party ones now that do both headphone output and USB-C power input.
[0] No "u", not even in the UK
Wait until they discover off brand usb cable with incorrect e-marker.
> Tracker What if someone steals my bag? Hopefully the PebbleBee "Find My" device will help me recover it.
In your review (from last year) of the tracker, you wrote it doesn't work with Graphene. [1] From the linked issue, looks like there's partial support now. [2] What's the experience like now on Graphene? Is it good enough for tracking a checked bag or similar?
[1] https://shkspr.mobi/blog/2025/01/review-pebblebee-clip-unive...
[2] https://github.com/GrapheneOS/os-issue-tracker/issues/4079
I've had a couple be broken by getting "squashed" because there's no mechanical support because of the rounded edges so the metal easily pancakes.
They also seem to be easily damaged such they stop connecting through a failure mechanism I haven't quite figured out (my macbook air no longer reliably connects to them).
Finally, the ports don't have reliable insertion and they're sharp, so they scratch up whatever device they're on as people repeatedly miss the insertion position resulting in surface scuffing. Phones especially should not be using them because of this issue and should be using something like lightning that did not have any sharp edges which avoided most scratching.
https://www.amazon.com/dp/B0FC1HSS9X/ for RJ45/Ethernet - these are super small and deliver full gigabit speed, for instance.
Similar things for video (tiny HDMI male adapter), and even my walkie-talkie (the Chinese market has come up with Motorola programming cable adapters that are just little dongles - https://www.ebay.com/itm/800104798120 - I can reprogram and even reload AES256 keys into my radio!).
PD triggers let my travel CPAP run off of battery (using a Transcend Micro - it only needs a 19V PD trigger and a solid 100W).
And of course... an Ecoflow solar hat and a battery I can shove in my back pocket for when I'm wandering around in the open air.
... and I just realized I can hook my Sony Reon Pocket cooler up to the solar hat...
Equivalent hanging mass:
8 N is 0.82 kg
20 N is 2.04 kg
As an aside, the specified extraction force for USB A is:
10 N minimum when new
8 N minimum after durability cycling
I don't have problems with USB-C connectors per se. I think HDMI is worse in terms of durability.